volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Driver Information Module (DIM), Replacing|Page 15344 > < Initial Inspection and Diagnostic Overview|Page 15341
Page 1
background image

Driver/Vehicle Information Display: Service and Repair
Driver Information Module (DIM), Replacing

Driver Information Module (DIM), Replacing 

Preparations 

NOTE:  Read off data from the control module before replacing the control module. This is carried out via VADIS communication. The current data
must be entered into the new control module after replacement.

Driver information module (DIM), replacing 

Ignition off.

Remove the key.

NOTE:  The key must be removed to ensure that the ignition is not switched on by mistake.

NOTE:  After the key has been removed:  Wait 1 minute before starting work.

Remove: 

Driver Information Module (DIM), Replacing|Page 15344 > < Initial Inspection and Diagnostic Overview|Page 15341