S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Clamp all cables to each other along the wheel housing using tie straps from the kit.
Connection to the rear fuse holder, for cars without RTI
Applies to cars up to and including model year 2004
-
Remove the fuse holder. Open the lock (1) on the top of the fuse holder. Fold the fuse box holder forward. Lift it out of the mountings (2).
Applies to cars up to and including model year 2004
-
Position the red/white (R/W) wire with the small cable terminal back along the cable. Insulate it and fasten it at the cable with foam tape from the
kit (it must not come into contact with the chassis).