volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cable Harness For the Radio (Accessory Electronic Module)|Page 15859 > < Cable Harness For the Radio (Accessory Electronic Module)|Page 15857
Page 23
background image

Illustration C

-

Collect any excess cable and clamp it in by the existing cable harnesses by the fuse holder with a tie strap from the kit.

-

Securely clamp the cables at the cable harness/cable duct with tie strap (1) from the kit.

-

Reinstall the front and the folding rear panel in the left-hand side of the cargo compartment.

-

Reinstall the side bolster.

-

Fold the backrest back into place.

-

Reinstall the seat cushion.

-

Turn the ignition key to position II.

-

Reinstall the seat cushion.

-

Reconnect the battery negative lead.

-

Reinstall the cargo compartment carpet.

Check that the system is working. 

-

Install the memory unit (DMS) in the Jukebox.

-

Switch on the radio and select the 10-CD changer.

Note! The first time the system is started it takes approx. 30 seconds before it is operational.

Cable Harness For the Radio (Accessory Electronic Module)|Page 15859 > < Cable Harness For the Radio (Accessory Electronic Module)|Page 15857