S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Illustration A
-
Remove the rear electronic module (REM) by opening the catch (1) on the top of the module. Tip the module forward and lift it out of the
mountings (2).
Illustration B
-
Position both green connectors on the short cables and the red/white (R/W) single cable with the smaller cable terminal, backwards along the
cable. Insulate and secure them by the cable with foam tape from the kit so that they do not make contact with the chassis. The single cable with
the larger cable terminal and the long cable with green connector must be loose.
-
Connect the red/white (R/W) single cable with the larger cable terminal to fuse socket 10 on the fuse holder.
-
Install a 10A fuse in fuse holder 10.
-
Reinstall the electronic module.
