S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Connect the red/white (R/W) single cable with the smaller cable terminal to position 8 in the connector.
-
Reinstall the connector in the holder and reinstall the whole unit in the fuse holder.
-
Take the mounting plate and console from the kit.
-
Align the mounting plate centered on the underside of the console as illustrated and mark out the four holes to be drilled.
-
Drill out the holes. Use a - 6 mm (15/64 ") diameter drill bit.
-
Deburr the hole edges and apply anti-corrosion agent to them.
-
Take the mounting plate, Jukebox, four M4 screws, four M4 lock nuts, four plate washers, four plastic washers and four plastic sleeves from the
kit.
-
Install the Jukebox with the front facing the mounting plate's bent edge with the bent edge down as illustrated.
