volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cable Harness For the Radio (Accessory Electronic Module)|Page 15901 > < Cable Harness For the Radio (Accessory Electronic Module)|Page 15899
Page 36
background image

-

Take four M5 screws, four washers and four M5 nuts from the kit and tighten the mounting plate with the Jukebox on the inside of the console's
lower edge.

Illustration A

-

Take two spring clips from the kit and install them in the two holes in the left-hand rear side member.

Illustration B

-

Install the small bracket (1), designed for the Jukebox console, in the rear crossmember under the left-hand rear lamp. Use screw (2) from the kit.

Cable Harness For the Radio (Accessory Electronic Module)|Page 15901 > < Cable Harness For the Radio (Accessory Electronic Module)|Page 15899