volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cable Harness For the Radio (Accessory Electronic Module)|Page 15902 > < Cable Harness For the Radio (Accessory Electronic Module)|Page 15900
Page 37
background image

-

Take the adapter cable from the kit and connect to the corresponding socket in the rear edge of the Jukebox.

-

Connect the long cable with green connector and DIN cable to the adapter cable on the Jukebox.

-

Connect the brown ground cable (1) with matching cable on the jukebox.

-

Collect any excess cable and clamp it in by the existing cable harnesses by the fuse holder with a tie strap from the kit.

-

Take two screws (there are two screws in the console) from the kit and tighten the console with Jukebox to the body. Torque tighten the screws to 
10 Nm (7.5 lbf.ft.).

Connecting to the fuse holder

Cable Harness For the Radio (Accessory Electronic Module)|Page 15902 > < Cable Harness For the Radio (Accessory Electronic Module)|Page 15900