volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cable Harness For the Radio (Accessory Electronic Module)|Page 15914 > < Cable Harness For the Radio (Accessory Electronic Module)|Page 15912
Page 49
background image

-

Insert a hand. Press up the catches (1) in the lower compartment (2). Remove the compartment.

-

Pull the wiring out of the radio tray.

-

Connect the adapter cable from the kit between the radio and existing cable.

-

Connect the antenna cable and any other wiring.

-

Pull out the latch handles (1) fully.

-

Slide the radio into the compartment.

-

Press in the latch handles to lock the radio into place.

Applies to cars which have not previously had a radio installed.

Cable Harness For the Radio (Accessory Electronic Module)|Page 15914 > < Cable Harness For the Radio (Accessory Electronic Module)|Page 15912