S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Position the loudspeaker and the mountings (1) in the panel around the rectangular hole in the parcel shelf.
-
Adjust the loudspeaker towards the two predrilled holes in the panel.
-
Install the screws (2) from the kit. Tighten the loudspeaker.
-
Connect the loudspeaker to the pre-routed connector.
-
Carry out the above procedure on the opposite side.
-
Thread the seat belts through the holes in the parcel shelf.
-
Reinstall the parcel shelf panel.
-
Tighten the seat belt end mountings using the new screws from the kit. Tighten to
50 Nm (37 lbf ft.).
-
Reinstall the C-post panels
-
Reinstall the side bolsters.
-
Reinstall the seat cushion, if removed.
-
Reinstall the seat belts in the guides on the right and left hand side cushions.
-
Fold the backrests back into position.
Loudspeakers, Front Door
Loudspeakers, front door
