S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Remove the connector (1) for the door controls
-
Remove the wire (2) from the door opener (3). First bend up the catches
-
Remove the panel
-
Carefully remove the moisture inhibitor (4) at the front edge
-
Remove the moisture inhibitor (5) covering the existing loudspeaker hole.
Installation
-
Install the new loudspeaker. Screw the loudspeaker into place using the screws (1) and nuts (1) from the kit
-
Install the moisture inhibitor (2)
-
Connect the connectors (3) to the loudspeaker and the module for the door controls
-
Connect the cable (4) to the door opener (5)
-
Reinstall the door panel, according to Rear door bass speakers See: Rear Door Bass Speakers.
Applies to the S80 only
Preparations
-
Remove the clips (1) by pressing in the centre of the clips.