S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Install the trailer connector (1). Use the three screws (2) and the nuts (3). Tighten
-
Route the cable along the underneath of the tow hitch member as illustrated
-
Secure the cable using two tie straps.
Applies to the V70 (00-) and V70XC (01-)
-
Install the trailer connector (1). Use the three screws (2) and the nuts (3). Tighten
-
Ensure that the cable harness is as close to the centre mounting on the tow bar member as possible. This is important to prevent the cable harness
from being caught in the cut-out bumper
-
Secure the cable using a tie strap.
Applies to the S80
-
Install the trailer connector (1). Use the three screws (2) and the nuts (3). Tighten
-
Route the cable harness behind the screw (4) on top of the tow bar. Then route the cable harness down past the bracket (5)
-
Clamp the cable harness at the bracket. Tighten the clamps (6).
Installing the connector for fixed tow bars
