S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
that the clips release from the rear crossmember.
Applies to the XC90
Illustration A
Applies to cars with two rows of seats
-
Fold up the centre rear floor hatch (1)
-
If the floor hatch is equipped with a carrier bag holder, it is secured by a strap on each of the shorter sides of the storage box. Release the straps
and remove the carrier bag holder
-
Remove the storage box
-
If the fog tail lamp and/or positive power supply / charge function is being connected, remove the floor hatch completely by folding it almost all
the way down and pulling it out backwards from its mountings.
Applies to cars with three rows of seats and integrated carrier bag holder on the underside of the centre floor hatch
-
Fold the rear centre floor hatch up
-
Detach the two straps from the panel. Lift up the rear edge of the panel. Fold the floor hatch back towards the panel and lift out the floor hatch and
the panel.
Applies to cars with three rows of seats without integrated carrier bag holders
-
Lift up the centre rear floor hatch at the rear edge and lift it out
-
Remove the two side floor hatches (2).
For all CX90
-
Remove the two side floor hatches (2).
Illustration B
-
Remove the folding side panel on the left and right-hand sides of the cargo compartment.
Illustration A
