volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Towing Relay Kit, Brake Lamps|Page 16627 > < Towing Relay Kit, Brake Lamps|Page 16625
Page 14
background image

-

Remove the rear headlining covers and the screws underneath the covers

-

Carefully pry off the panel at the rear edge using a plastic weatherstrip tool

-

Pull the rear edge of the panel downwards until the four clips on the top have released

-

If the car has lighting in the panel, disconnect the connector

-

Pull the panel backwards to release it.

-

Carefully pull off the D-post panel. Start at the top edge then pull down until the three clips on the inside release. Do not damage the panel

-

Disconnect the connector on the D-post panel (if the car has a loudspeaker in the D-post there is a connector in the loudspeaker)

-

Remove the panel by pulling upwards slightly and unhooking it from the side panel.

Illustration A shows the removal of the cover for the load securing eyelets 

-

Fold out the load securing eyelet

-

Insert a scriber with an angled tip into the hole in the top of the cover

-

Turn the scriber so that the angled tip engages in the reverse of the cover (1). Pull off the cover.

Illustration B applies to cars with two rows of seats

Towing Relay Kit, Brake Lamps|Page 16627 > < Towing Relay Kit, Brake Lamps|Page 16625