S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
INTRODUCTION
-
NOTE! Read through the whole installation instruction before starting the work.
-
The illustrations display the procedure in order of operation. The order of operation is repeated in the text section.
Towbar, hitch, license plate holder
Image A applies when mounting on the holder's horizontal square tube
Image B applies when mounting on the holder's vertical square tube
-
Take the license plate holder and tighten it at the holder with the clamp, spacer sleeves and nuts from the kit as illustrated. Tighten the nuts to 7
Nm (5.2 lbf.ft).
-
Take the two screws from the kit and tighten the license plate into place.
