S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
On the XC90 the cable harness is routed in the same way regardless of the tow hitch type
-
Install the trailer connector (1). Use the three screws (2) and the nuts (3). Tighten
-
Route the cable harness to the right along the front edge of the tow hitch member
Note! If the cable harness is stretched too far it may be worn through by the lower edge of the bumper.
Ensure that the cable harness forms a small loop around the lower edge of the bumper as illustrated in illustration B
-
Secure the cable harness using a tie strap on each side of the brackets for the tow hitch member.
Cargo compartment preparations
Applies to the S60
Illustration A
-
Fold back the carpet
-
Remove the clips at the bottom edge of the right and left folding panels (press the centre of the clips until there is an audible click)
-
Remove the clips.
Illustration B
