S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Rear Bumper Cover / Fascia: Service and Repair
Casing, Bumper Rear, Replacing
Casing, bumper rear, replacing
Preparations
Note! Remember to paint the casing before replacement.
Removal
Cargo compartment
Fold forward the rear section of the carpet (1) in the cargo compartment.
Turn the clips (2). Remove the four clips for the left and right side panels.
Fold the panels forward towards the center.
Remove the cover (3).
Remove the screws
Grip the outer edges of the panel (5). Pull the panel inwards towards the center so that the clips release at the sides.
Disconnect the connectors (6) for the side lamps.
Remove the panel by pulling it straight upwards so that the clips release from rear crossmember.
Bumper mounting
Disconnect the connector (2) for the antenna. Lift up the catch on the connector and pull carefully.
Remove the rubber seals (1). Remove the nuts (1).
The rivets in the wheel arch