volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Casing, Bumper Rear, Replacing|Page 17311 > < Casing, Bumper Rear, Replacing|Page 17309
Page 10
background image

Installing components

Install:

-

the soundproofing

-

the electrical unit

-

the clip for the cable harness holder

-

the RTI/CD player (if applicable).

Replace the casing.
Transfer the components.
Assemble the bumper.

Installation

Installing the bumper

Note! Do not damage the antenna connection.

Align the end pieces (1) in the rails (2).
Press into place.

Installing the cargo compartment

Install the nuts (1). Tighten to 18 Nm.
Install the rubber seals (1) over the nuts.
Connect the connector for the radio antenna on the right-hand side.

Installing the fender liner

Casing, Bumper Rear, Replacing|Page 17311 > < Casing, Bumper Rear, Replacing|Page 17309