S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Hood Latch Release Cable: Service and Repair
Hood release cable, replacing
Hood release cable, replacing
Remove:
-
turn signal lamp. See Turn signal lamps, replacing See: Lighting and Horns/Turn Signals/Turn Signal Lamp/Service and Repair
-
the headlamps. See Headlamps
-
the front section. See Front end See: Radiator Support/Service and Repair
-
the air cleaner (ACL) housing. See Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake
Hose/Line/Service and Repair/Brake Pipe Master Cylinder / ABS Unit, Replacing (removal), or Brake pipe master cylinder / ABS unit, replacing
See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Brake Pipe Master Cylinder / ABS Unit, Replacing
(installation)
-
the soundproofing panel. See Soundproofing panel, replacing See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Soundproofing Panel, Replacing.
-
the mechanical cable from the locks.
-
the cable from the hood catch control. See Mechanism, hood release, replacing See: Hood Latch/Service and Repair/Mechanism, Hood Release,
Replacing.
Hint: Fasten the new cable to the old cable in the passenger compartment.
Feed and pull the new cable to the correct position.
Install:
