S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Remove:
-
the screws for the spark plug cover
-
the cover
-
the ground strip screw.
Applies only to turbocharged engines:
Remove the screws.
Lift up the delivery lines. Remove the spark plug cover.
Installing the lifting lug
Remove the 2 screws at the engine mounting.
Install lifting lug999 5717 Lifting eye See: Tools and Equipment/999 5717 Lifting Eye.
Removing lifting tools
Remove the lifting lug and the lifting hook from the engine and the car
Remove the lifting lug from the engine. Install the screws. Tighten to 50 Nm.
Reinstall the spark plug cover. Tighten the screw. Tighten to 10 Nm.
Install the ground strip. Tighten to 10 Nm.
Lift up the delivery lines. Install the spark plug cover (applies only to turbocharged cars).
Installing the charge air pipe (only applies to 6 cylinder turbocharged engines)