S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
In reverse order.
Height Adjustment Motor, Front
Front-rear adjustment motor
Replacing the motor for front-rear adjustment
Remove:
-
the bracket. See Bracket (cross stay) See: Service and Repair/Removal and Replacement/First Generation Power Seats/Bracket (Cross Stay).
-
the two screws.
-
two screws (B)
-
the motor.
Note! Bend the system upwards until it can be dismantled.
Note! Ensure that the rails do not alter position during replacement.
Installation
Install:
In reverse order.
The seat must be tightened to the floor. Tighten to 48 Nm.
Height Adjustment Motor, Rear
Rear height adjustment motor
Replacing the rear height adjustment motor
Remove
-
the seat from the car and the bracket. See Lifting seats in and out See: Service and Repair/Removal and Replacement/Front Seat/Lifting the Front
Seats In and Out