S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Remove the seat from the car. See Removing power seats, tilting See: Service and Repair/Removal and Replacement.
Disconnect the connector at the control module or the connector at the motor.
Note! Carefully release the catches on the connector.
Remove the two screws.
Installing the motor for rear height adjustment
Install:
-
the two screws
-
the connector
-
the seat. See Lifting seats in and out See: Service and Repair/Removal and Replacement/Front Seat/Lifting the Front Seats In and Out.
Rear Height Adjustment Motor
Rear height adjustment motor
Replacing the rear height adjustment motor
Remove
-
the seat from the car and the bracket. See Lifting seats in and out See: Service and Repair/Removal and Replacement/Front Seat/Lifting the Front
Seats In and Out
-
the connectors. See Connector See: Service and Repair/Removal and Replacement/Second Generation Power Seats/Connector.
-
the two screws (seat belt buckle).
-
the two screws.
Install:
In reverse order.
Tighten the screws for the seat belt buckle. Tighten to 48 Nm.
Drive Shaft For Height Adjustment