volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

ABOUT US
Replacing the Yaw Rate Sensor (1) and the Lateral Acceleration Sensor in the Center Console (DSTC)|Page 8721 > < Replacing the Yaw Rate Sensor (1) and the Lateral Acceleration Sensor in the Center Console (DSTC)|Page 8719

S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)

Page 3
background image

Caution! It is important that the bracket is reinstalled correctly in the body. If the bracket for the sensor is incorrectly reinstalled there is a risk
of malfunction.

Install:

-

the connector for the sensor

-

the bracket on the body. Tighten the screws. Tighten to 10 Nm.

Note! The screws must be correctly tightened to ensure reliability.

Installing the seat rail

Replacing the Yaw Rate Sensor (1) and the Lateral Acceleration Sensor in the Center Console (DSTC)|Page 8721 > < Replacing the Yaw Rate Sensor (1) and the Lateral Acceleration Sensor in the Center Console (DSTC)|Page 8719