S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Vacuum Brake Booster: Service and Repair
Power Brake Booster, Replacing, L.H.D
Power brake booster, replacing
Preparation
Disconnect the battery lead
See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Removal
Preparations for removing the power brake booster
Switch off the ignition.
Remove the cross member
See Brake fluid reservoir, replacing, L.H.D See: Hydraulic System/Brake Fluid Reservoir/Service and Repair/Brake Fluid Reservoir, Replacing, L.H.D.
(On 5 cylinder engines). Remove the screws and nuts from the engine mounting. Lift out the cross member.
Remove the air cleaner (ACL) housing
See Brake pipe master cylinder / ABS unit, replacing See: Hydraulic System/Brake Hose/Line/Service and Repair/Brake Pipe Master Cylinder / ABS
Unit, Replacing.
Remove the plastic cap and the cable holder
See Brake pipe master cylinder / ABS unit, replacing See: Hydraulic System/Brake Hose/Line/Service and Repair/Brake Pipe Master Cylinder / ABS
Unit, Replacing.
Remove the integrated relay / fusebox
See Replacing the brake pipe between the hydraulic unit, front wheel and junction See: Hydraulic System/Brake Hose/Line/Service and Repair/Brake
Pipe Hydraulic Unit / Junction / Front Wheel, Replacing.
Preparations for removing the ABS unit
