S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Clean around the sensor seat so that when installed the sensor will be in the correct position against the pulse wheel. Use a soft brush.
Install the wheel sensor wiring. Tighten the screw. Tighten to 10 Nm.
Install the wiring in the mounting and the bracket.
Install the wheel sensor connector
Secure the new connector to the loose cable.
Pull up the sensor connector between the fuel tank and the bodywork (1) to the second connector.
Disconnect the cable from the connector.
Connect the sensor connector to the existing connector (2).
Reinstall the fuel pump (FP) cover.
Finishing work
Fold the cargo compartment carpet back into place.
Install the side backrest panel.
Install seat cushion for the rear seat.
Install the wheel
