volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

ABOUT US
Replacing the Yaw Rate Sensor (1) and the Lateral Acceleration Sensor in the Center Console (DSTC)|Page 9182 > < Replacing the Yaw Rate Sensor (1) and the Lateral Acceleration Sensor in the Center Console (DSTC)|Page 9180

S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)

Page 4
background image

Install the front seat fixture to the body.
Install the 4 screws. Tighten to 25 Nm.
Install the protective cover over the screws.

Checking and test driving

Checking the dynamic stability and traction control (DSTC)

Press the dynamic stability and traction control (DSTC) switch (DSTC engaged).
Turn on the ignition. Wait for five seconds. The symbol on the dashboard should go out.

Test-driving

 Test Drive Form (DSTC (dynamic stability and traction control) /brake control module), description See: Antilock Brakes / Traction Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Drive Form (DSTC (Dynamic Stability And Traction Control) /Brake
Control Module), Description.

Replacing the Yaw Rate Sensor (1) and the Lateral Acceleration Sensor in the Center Console (DSTC)|Page 9182 > < Replacing the Yaw Rate Sensor (1) and the Lateral Acceleration Sensor in the Center Console (DSTC)|Page 9180