S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Remove
-
the upper timing belt cover.
Lift up the servo reservoir and place it on top of the engine
Warning! Seal the cover for the servo reservoir. Check that no oil leaks out. Servo oil is highly inflammable.
-
the screw for the front timing belt cover
Applies only to B6xx4T engines. For cars with chassis numbers203779-, see Timing cover front, replacing See: Engine/Timing Components/Timing
Cover/Service and Repair
-
the timing belt cover.
Disconnect the connector for the sensor cable.
Remove the variable valve timing solenoids and place them to one side.
Remove the screw for the cable duct.