S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Remove the screw from the bracket for the fuel line.
Remove the screw for the bracket for the fuel line on the auxiliaries bracket.
Slacken off all the screws holding the oil pan.
Remove all but four screws. It is recommended that the four screws in the corners of the pan are left in place.
Carefully tap the pan using a rubber mallet until the joint and its liquid gasket releases.
Remove:
-
the four remaining screws
-
the oil sump.
Cleaning
Clean the gasket surfaces on the oil pan and cylinder block. Use a razor blade or a gasket scraper and gasket solvent 116 1440.
Warning! Use a fume hood or extractor when using gasket solvent.
Note! Also clean the gasket faces for the screws for the torque rod.
Installing the oil pan
Apply liquid gasket 116 1059-9 to the sump. Use roller 951 1205 See: Tools and Equipment/951 1205.
