S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Install new O-rings around the spark plug wells at the cylinder head.
Apply liquid gasket 116 1059 to the camshaft cover. Use roller 951 2767 Roller See: Tools and Equipment/951 2767 Roller. The surface must be
completely covered without any excess.
Note! Make sure that no liquid gasket gets into the oil channels.
Installing the camshaft covers
Lubricate the camshaft lobes, the camshaft bearing surfaces and the valve lifters.
Install the camshaft cover.
Install press tool 999 5454 PRESS TOOL See: Tools and Equipment/999 5454 Press Tool (2x).
Tighten the camshaft cover screws alternately, keeping it parallel to the cylinder head with the press tools.
Install all the screws and tighten.
Install the variable valve timing solenoids using new gaskets.
Remove the press tools.
Install the spark plugs. Tighten to 30 Nm.
Installing the rear camshaft seal
Use drift 999 5450 PUNCH See: Tools and Equipment/999 5450 Punch.
Lubricate the surface of the seal that the camshaft rotates against.
Press in the seal until the drift bottoms out.
