S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Install:
-
the screws for the oil return line. Use new gaskets
-
lower coolant pipe. Use new gaskets. Tighten to 26 Nm
-
the pipe screw for the pressure oil outlet on the engine. Use new gaskets. Tighten to 38 Nm
-
the clamps between the oil pressure pipe / coolant pipe and the intake pipe for the water pump
-
the vacuum hose on the pressure regulator (turbocharger (TC) 1)
-
the clamp for the vacuum pipe (turbocharger (TC) 1).
Installing three-way catalytic converters (TWC) / front exhaust pipe