S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Position the motor
-
Turn the shaft on the heater unit so that the motor can be installed
-
Position the motor
-
Install the screws for the motor
-
Install the switch.
Left-hand drive
-
Install the glove compartment. See Glove compartment, replacing See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and
Repair
Right-hand drive
-
Install the soundproofing panel. See Soundproofing panel, replacing See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Soundproofing Panel, Replacing
-
Carry out self-adjustment of the damper motor end positions. This is carried out via VIDA communication.