S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Separate the pin and socket housings of the connector
If the connector is intact:
-
First disconnect the socket housing from the pin housing as in Example 2A See: Diagrams/Diagnostic Aids/Example 2A.
Open the connector
-
Turn the retaining ring on the connector counterclockwise until a "click" indicates it has disengaged.
-
Remove the retaining ring and pull back on the cables.
-
Release the two catches on the sides using a narrow screwdriver.
-
Withdraw the inner tube and pull back on the cables.
Open the pin housing
