S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
the six screws.
-
Lift out the coolbox.
Installation
Installing the coolbox
Caution! The wiring from the coolbox to the connector on the left-hand side must be routed to the right and underneath the reinforcement
strut.
Install
-
in reverse order.
Tighten the six screws for the coolbox. Tighten to 10 Nm.
Replacing the Transformer
Replacing the transformer
Removal
Preparations
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Disconnect the battery lead. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Remove:
-
the two seat cushions by pulling them straight up
-
disconnect the connector
-
the coolbox. See Replacing the cool box See: Replacing the Cool Box.