Volvo Workshop Service and Repair Manuals

Remove:

-

the connector

-

the pressure sensor.

Installation

Installing the pressure sensor

Install:

-

the pressure sensor. 

-

the connector.

Finishing

Note! For tightening torques, See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening Torque.

Filling with coolant and leak tracing

Vacuum pump the air conditioning (A/C) system. See: Vacuum pumping See: Service and Repair/Vacuum Pumping.
Fill the system. See: Refrigerant, filling See: Service and Repair/Refrigerant, Filling 
Leak trace the system. See: Leak tracing, fluorescent tracing agent / UV lamp See: Testing and Inspection/Component Tests and General
Diagnostics/Leak Tracing, Fluorescent Tracing Agent / UV Lamp or: Leak tracing, electronic leak tracer See: Testing and Inspection/Component Tests
and General Diagnostics/Leak Tracing, Electronic Leak Tracer.

Installing the air baffle

Install the 2 x M6 screws for the air baffle. Tighten. See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening
Torque.