S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Install the left-hand level sensor on the ejector.
Install the connectors on the underside of the left-hand level sensor.
Install a new O-ring. Lubricate the new O-ring. Use petroleum jelly.
Press the left level sensor down so that the row of protruding cables runs along the vehicle.
Check that the O-ring is not trapped.
Install the screw. Use 999 5720 Wrench See: Tools and Equipment/999 5720 Wrench. Tighten. See: Tightening torque See: Specifications/Mechanical
Specifications/Starting and Charging.
Position the wiring in the cut-out in the rubber ring.
Wipe up any fuel spillage.
