volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Trouble-Shooting Information|Page 19672 > < Trouble-Shooting Information|Page 19670
Page 2
background image

Is there a fault?

Yes - FAULT FOUND

No - Checking the sensor resistance

-------------------------------------------------

Checking the sensor resistance

Check resistance of both fuel gauge sensors. The resistance across the respective sensor may vary between 12 ohm (full tank) and 383 ohm (empty tank).

Hint: The resistance of the left fuel gauge sensor can be measured between fuel gauge sensor connectors 5 and 6. The resistance of the right fuel gauge
sensor can be measured between fuel gauge sensor connectors 6 and 7.

Do the necessary corrective action.

Additional information:

-

For information about signals and other values, see Signal specification See: Body and Frame/Body Control Systems/Testing and
Inspection/Pinout Values and Diagnostic Parameters/Signal Specification 

-

To access the fuel gauge sensor connector/replace fuel gauge sensors, see Left fuel gauge sensor See: Service and Repair/Left Fuel Gauge Sensor
and Right side fuel pump with level sensor See: Service and Repair/Right Side Fuel Pump With Level Sensor.

Trouble-Shooting Information|Page 19672 > < Trouble-Shooting Information|Page 19670