S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Wipe the seat frame clean on the marked surface at the centre console as illustrated
-
Remove the backing from the piece of tape. Apply the tape around the seat frame so that the tape joins at the reverse of the seat frame.
Installing the lamp mounting
-
Install the lamp mounting on the piece of tape around the seat frame as close to the centre console as possible. Tighten the mounting using the
screw (1)
-
Adjust the lamp mounting to the desired position. Tighten using the screw (2)
-
Install the reading lamp in the mounting. Connect the cable to the cigarette lighter socket.
Disassembling the reading lamp when replacing the bulb
-
Remove the lamp glass. First carefully pry off the top edge of the lamp using a small screwdriver.