S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Terminal removal tool See: Tools and Equipment/951 2637 Terminal Removal Tool , as illustrated.
At the same time pull the cable carefully backwards.
Connector, assembling
Primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.
Secondary lock
Slide the receptacle housing into the connector.
Press the secondary lock into place.
Sealed Connector Type 1
Connector sealed, repair
Special tools:951 2631 Terminal removal tool See: Tools and Equipment/951 2631 Terminal Removal Tool.
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Connector, dismantling
The connector has no secondary lock.
Primary lock
Use tool951 2631 Terminal removal tool See: Tools and Equipment/951 2631 Terminal Removal Tool to remove the primary lock, as illustrated.
At the same time pull the cable carefully backwards.
