S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Release the upper catches using a weatherstrip tool. Lift out the control module.
Note! Check that the control module's connectors are intact.
Installing the passenger door module (PDM)
Press the control module into place.
Install:
-
the connectors
-
the nut and screw
-
the door panel, see Replacing the front door side panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service
and Repair/Replacing the Front Door Side Panel.
Ordering software
Order software for the passenger door module (PDM) according to the table below.
Finishing
Initialize the window position in the communication input.
Upper Electronic Module (UEM)
Interior lighting and upper electronic module (UEM), replacing
Replacing the lens and the bulb
