S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Push the floor carpet and insulation panel to one side.
-
Remove the two screws from the bracket (2) on the tunnel (the screws will not be reused)
-
Place the end mounting in position, Tighten using both screws (1). Tighten to 25 Nm (19 lbf. ft).
-
Fold up the tab on the firewall
-
Remove the adhesive label covering the hole (2)
-
Install the mounting eyelet (1) using the screws (3) from the kit. Tighten to 25 Nm (19 lbf. ft).
