volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

End Mounting, Replacing|Page 14541 > < End Mounting, Replacing|Page 14539
Page 1
background image

Seat Belt: Service and Repair
Seat Belts, Replacing

Seat belts, replacing

Front seat belt

Preparations

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.

Disconnect the battery lead.
See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting 
For the seat belt tensioner, see Handling non-deployed SRS-components See: Service and Repair/Discarding Pyrotechnic Components 

Caution! Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected non-deployed seat
belt tensioner. This could deploy it.

Caution! Always replace the seat belt (inertia) reels with the seat belt tensioners and seat belt buckles after a collision. Always replace the seat
belts, seat belt tensioners and seat belt buckles when an airbag has deployed. In the event of a collision where the airbag did not deploy the seat
belt tensioners must be checked and replaced if necessary.

Caution! Seat belt tensioners must never be unscrewed, repaired or moved to another vehicle.

Removing the front seat belt (inertia) reels

End Mounting, Replacing|Page 14541 > < End Mounting, Replacing|Page 14539