S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Connector, assembling
Primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.
The secondary lock
Press the secondary lock into place.
Connector Type 7
Connectors, repair
Special tools:951 2633 Terminal removal tool See: Tools and Equipment/951 2633 Terminal Removal Tool ,951 2639 Terminal removal tool See: Tools
and Equipment/951 2639 Terminal Removal Tool ,951 2637 Terminal removal tool See: Tools and Equipment/951 2637 Terminal Removal Tool ,951
2812 Terminal removal tool See: Tools and Equipment/951 2812 Terminal Removal Tool.
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Connector, dismantling
Secondary lock
Press out the secondary lock from the cable side using tool951 2633 Terminal removal tool See: Tools and Equipment/951 2633 Terminal Removal Tool
or an electrician's screwdriver, as illustrated.
Primary lock
