S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Impact Sensor: Service and Repair
Collision sensor, replacing
B-post sensor
Preparations
Disconnect the battery lead.
See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting
Removal
Remove:
-
the B-post panel. See Panel, B-post, replacing See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Panel, B-Post,
Replacing
-
the connector (press the catches and pull downwards carefully)
Note! Do not pull the wiring.
-
2 screws (6 Nm).
Replace the sensor.