S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Keep both catches pressed in (one on each side) and pull the connector cover up.
-
Remove the connector cover from the housing.
Open the housing
Release the secondary locking catches (one on each side) as follows:
-
Insert a narrow screwdriver blade as shown. Carefully bend back the catch at the edge and push the secondary locking slightly forwards (approx. 1
mm).
Extract the cable terminal
Follow the instructions in When the cavity opening has two extraction grooves See: Diagrams/Diagnostic Aids/Cavity Opening Has Two Extraction
Grooves.
Crimp new cable terminal
