volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Sensors and Switches - Wiper and Washer Systems > < Switch Electrical Sun Blind and Heater Pad, Replacing|Page 2328
Page 3
background image

Remove

-

the two screws under the parcel shelf

-

the parcel shelf according to Parcel shelf See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair/Parcel Shelf, Replacing.

Removing the power sun blind

Remove

-

the five holders.

Thread out the mechanism with the sun blind through the opening in the parcel shelf.

Removing the end piece

Remove

-

the screw. Pull the end piece off the sun blind straight out to the side.

Removing the control module

Remove

-

the connector

-

the screw

-

the control module.

Installation

Installation

Install

-

In reverse order.

Tighten the two screws for the parcel shelf to 10 Nm.

Other information

-

Install the new control module. Use a screw and double-sided adhesive tape.

Sensors and Switches - Wiper and Washer Systems > < Switch Electrical Sun Blind and Heater Pad, Replacing|Page 2328