S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
ohms
The ohmmeter should read approximately 0.
OK - FAULT FOUND
Not OK - contact resistance and oxidation
-------------------------------------------------
Checking for open-circuits, contact resistance and oxidation
For the control module, check ground terminal 31/84 and the wiring connected to it. Check for an open-circuit. See Checking wiring and terminals.
Permanent fault See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated
Procedures/Related Tests, Information and Procedures/Checking Wiring and Terminals. Permanent Fault. Check for contact resistance and oxidation.
See Checking wiring and terminals. Permanent fault See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic
Trouble Code Tests and Associated Procedures/Related Tests, Information and Procedures/Checking Wiring and Terminals. Permanent Fault.
