volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 12620 > < Reading and Clearing Diagnostic Trouble Codes|Page 12618
Page 36
background image

Activate buttons and read status on cruise-control switch unit buttons.
If read-out gave a correct result the fault is in the cable between the audio/telephone switch unit and cruise-control switch unit.

Additional information:

-

To access cruise control switch unit see RTI switch See: Steering Mounted Controls Assembly/Service and Repair/RTI Switch.

Did read-out of status on cruise-control switch unit give a correct result?

Yes - FAULT FOUND

No - Checking the wires and components

-------------------------------------------------

Checking the wires and components

Check the voltage between B1 and B3. The voltage should be approximately 12V.
Check the voltage between B2 and B3. The voltage should be approximately 5V.
Check voltage between B3 and battery negative lead. The voltage should be approximately 0V.
If voltages measured above are OK, the fault is in the cruise-control switch unit.

Additional information:

-

To connect the test box, see Connecting the breakout box See: Pinout Values and Diagnostic Parameters/Connecting the Breakout Box 

Reading and Clearing Diagnostic Trouble Codes|Page 12620 > < Reading and Clearing Diagnostic Trouble Codes|Page 12618