S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Hook the expander in the plate bracket.
Install:
-
the expander
-
the return spring
-
the brake disc
-
the brake disc locating pin. Tighten to 10 Nm.
Installing the brake caliper
Install:
-
the brake caliper
-
the brake caliper mounting screw. Tighten to 60 Nm. Use new screws
-
the ABS sensor
-
the screws. Tighten to 10 Nm
-
the ABS sensor cable in the bracket
-
the wheels.
Finishing
Finishing (not AWD)
Install tensioner and tension the rear suspension to the normal position. See Tensioner, instructions for use, AW55-50/51SN, 4T65EV-GT See: Service
and Repair/Removal and Replacement/Tensioner, Instructions For Use.
Tighten:
-
the outer mounting for the tie rod. Tighten to 80 Nm
-
the rear mounting for the lateral link. Tighten to 80 Nm
-
the outer mounting for the lower control arm. Tighten to 80 Nm
-
the outer mounting for the upper control arm. Tighten to 80 Nm
-
the inner mounting for the upper control arm. Tighten to 80 Nm.
Finishing work (AWD)
