S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Pop rivet the exhaust pipe heat deflector into the left rear sub-frame mounting.
Install
-
the parking brake cable mounting in the sub-frame. Tighten to 25 Nm
-
the mounting for parking brake cable on the tie rod
-
the exhaust system. See Exhaust system, replacing See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair
-
the springs and shock absorbers. See Spring rear, replacing See: Suspension Spring ( Coil / Leaf )/Service and Repair/Rear Suspension/Spring
Rear, Replacing.
Note! At the same time tighten the tie rods and lateral links to the sub-frame. Tighten to 100 Nm and 80 Nm respectively. Use tensioner
999 5659 Tension caliper See: Tools and Equipment/999 5659 Tension Caliper. See Tensioner, instructions for use, AW55-50/51SN,
4T65EV-GT See: Service and Repair/Removal and Replacement/Tensioner, Instructions For Use.
