S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Installing the acceleration sensor
Note! It is essential that the acceleration sensors are installed with the soft side facing downwards and are securely fixed in the vehicle.
Otherwise movement may result in incorrect values being returned to the system, with poorer driving characteristics, when cornering for
example, as a result.
Note! For tightening torques, see Specifications See: Specifications/Mechanical Specifications/Starting and Charging.
Align the new acceleration sensor.
Install the M6 screw.
Route and secure the cable for the new acceleration sensor following the old cable. Remove the old cable.
Connect the connector.
Test the function.