volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Control System/Valve Housing, Removing|Page 7799 > < Control System/Valve Housing, Removing|Page 7797
Page 1
background image

Shift Solenoid: Service and Repair
Solenoid, Line Pressure, Replacing

Solenoid, line pressure, replacing

Side cover, transmission, removing

See Removing gearbox side cover See: Service and Repair/Removal and Replacement/Automatic Transmission Components/Removing Gearbox Side
Cover 

Removing the line pressure solenoid

Remove:

-

the connector

-

the spring clamp. Pull it straight out. Use a small screwdriver to bend the clamp out slightly

-

the solenoid from the control system. Use a screwdriver. Insert it between the solenoid and the control system. Carefully pry and pull on the
solenoid at the same time. Check that the O-rings remain on the solenoid.

Installing the solenoid

Control System/Valve Housing, Removing|Page 7799 > < Control System/Valve Housing, Removing|Page 7797